Hi!!..
Since everyone's asking me how to patch their Monte..I m using my friend Santosh's guide.. (M lazy to write a new one xD :P).
NOTE : Patching should be done once after flashing with your respective firmwares' patch. There is no need to patch again when installing new mods.
Guide controls -
Red - Warnings (Don't ignore them, EVER !!)
Blue - Necessary steps
What we will need :-
+ For Patching
1. Moddable Firmware (like XEJE1 or MFJF1. I'm using XEJE1 for this tutorial)
2. Patches for your respective firmware (There are patches for XEJE1, MFJF1 Iin My Android Honeycomb v2.3's package)
3. Multiloader 5.56 (Note : Multiloader 5.62 won't work for patching)
Warning : Don't use patches of other firmware with another. It wont brick your phone but it will cause booting problems!! You'll get a triangle with an "!" mark!!
+ For installing Mods (themes)
1. Any Mod Package
2. Nothing. You can copy the Mod via Windows Explorer.
You can download the patches (for XEJE1 only) and multiloader used in this guide here :
http://www.mediafire.com/?rmx4h4713qfsee8
PATCHING
Here we start -
1. Open Multiloader 5.56.
2. First of all, select LSI6410 in the control box.
Don't tick Master Rom, Don't tick Full Download, Don't tick Boot Change, Don't tick Differences only
3. Click on apps and navigate to and open apps.bin (apps_compressed.bin in my case)
4. Click on Rsrc2 and navigate to and open RC2 file (Rsrc2_S5620(Low).rc2 in my case)
5. Now, Turn off your phone, Press and hold Down Key + Camera Key + Power on key. It will go into download Mode, now connect the phone.
6. Press Download. Don't touch the phone. Its a 1 min process. After it restarts, Its Patched !!
Here is a fast paced, short video tutorial for patching the phone :
http://www.youtube.com/watch?v=ueqtGgq_WrQ
INSTALLING MODS (THEMES)
Lets install our Mod. As i mentioned above, I'm using My Honeycomb v1.0 mod for this tutorial. So here We start -
1. Download Mod Package and extract the .rar file (i prefer to extract it on desktop)
2. Connect your phone in kies Mode.
3. Open the folder where you have extracted The Mod. There you will see 2 Folders, Res and patches. Copy the Res folder to your Phone Memory.
4. Disconnect the phone and restart.
Voila !! You have Successfully installed Mod on your phone.
For everyone who is having any problem after patching like the phone is not starting and its stuck at booting, there are two simple solutions :-
1. First Flash to any patchable firmware (like XEJE1 or MFJF1) and then use the patches of your respective firmware.
2. If 1st one doesn't work, then try flashing to another firmware and then patching it.
But always remember, u must flash to any patchable firmware first before patching.
If you have any questions, Please ask it here or check if they have been answered in Forum or siris_cac's FAQ for Modding Here :
http://darkforestgroup.com/forum/index.php/topic,8639.0.html
I'll update the guide as frequently as possible to make it more compact and Easy to understand.
Thank You !
Since everyone's asking me how to patch their Monte..I m using my friend Santosh's guide.. (M lazy to write a new one xD :P).
NOTE : Patching should be done once after flashing with your respective firmwares' patch. There is no need to patch again when installing new mods.
Guide controls -
Red - Warnings (Don't ignore them, EVER !!)
Blue - Necessary steps
What we will need :-
+ For Patching
1. Moddable Firmware (like XEJE1 or MFJF1. I'm using XEJE1 for this tutorial)
2. Patches for your respective firmware (There are patches for XEJE1, MFJF1 Iin My Android Honeycomb v2.3's package)
3. Multiloader 5.56 (Note : Multiloader 5.62 won't work for patching)
Warning : Don't use patches of other firmware with another. It wont brick your phone but it will cause booting problems!! You'll get a triangle with an "!" mark!!
+ For installing Mods (themes)
1. Any Mod Package
2. Nothing. You can copy the Mod via Windows Explorer.
You can download the patches (for XEJE1 only) and multiloader used in this guide here :
http://www.mediafire.com/?rmx4h4713qfsee8
PATCHING
Here we start -
1. Open Multiloader 5.56.
2. First of all, select LSI6410 in the control box.
Don't tick Master Rom, Don't tick Full Download, Don't tick Boot Change, Don't tick Differences only
3. Click on apps and navigate to and open apps.bin (apps_compressed.bin in my case)
4. Click on Rsrc2 and navigate to and open RC2 file (Rsrc2_S5620(Low).rc2 in my case)
5. Now, Turn off your phone, Press and hold Down Key + Camera Key + Power on key. It will go into download Mode, now connect the phone.
6. Press Download. Don't touch the phone. Its a 1 min process. After it restarts, Its Patched !!
Here is a fast paced, short video tutorial for patching the phone :
http://www.youtube.com/watch?v=ueqtGgq_WrQ
INSTALLING MODS (THEMES)
Lets install our Mod. As i mentioned above, I'm using My Honeycomb v1.0 mod for this tutorial. So here We start -
1. Download Mod Package and extract the .rar file (i prefer to extract it on desktop)
2. Connect your phone in kies Mode.
3. Open the folder where you have extracted The Mod. There you will see 2 Folders, Res and patches. Copy the Res folder to your Phone Memory.
4. Disconnect the phone and restart.
Voila !! You have Successfully installed Mod on your phone.
For everyone who is having any problem after patching like the phone is not starting and its stuck at booting, there are two simple solutions :-
1. First Flash to any patchable firmware (like XEJE1 or MFJF1) and then use the patches of your respective firmware.
2. If 1st one doesn't work, then try flashing to another firmware and then patching it.
But always remember, u must flash to any patchable firmware first before patching.
If you have any questions, Please ask it here or check if they have been answered in Forum or siris_cac's FAQ for Modding Here :
http://darkforestgroup.com/forum/index.php/topic,8639.0.html
I'll update the guide as frequently as possible to make it more compact and Easy to understand.
Thank You !
PLZZZZZZZZ HLLLPPPPPPP
ReplyDeletei ws hving orignl vrsn then i patched to ur windws aero and now it is hngd at startin showin windws aero.
Switch off your phone.. Switch it on by pressing unlock key and end call..This will open the patch menu..Your touchscreen doesnt work here..Use volume to go up and down,camera to select,call to exit and unlock key to save. Now go to the patches and deselect all patches by going on each and pressing camera key.Except masterpatch and SWF2FFS deselect all..Maximum no of patches for fast monte are 7-8.. then save with unlock key and exit..Good Luck..
DeleteHi. How to detect my phone firmware type (like XJXE1, etc.)
ReplyDeleteAnd How can I change it? which files I have need?
Please give me a complete solution, and if you suggest me to see darkforestgroup forum, please give me a link to a tutorial page.
And how can I add languages to it? I want to add persian to HTC Sensation.
And Isn't there any way to add qwerty keyboard?
Thanks!
Go to dial pad and type *#1234# for firmware bersion..And for how to do it,see the reply below..
Deleteis it possible for my monte with frmware
ReplyDeletesw ver
s5620 ddje1
csc ver
s5620 0ddjf1
It doesnt matter which firmware you have.You will have to flash your fone..
DeleteThings You will need.
1)www.adf.ly/3NYwk
2)www.adf.ly/3NZ8p
and the above mod also..
For the adf.ly links, you will see an ad,on right top click skip ad which will come in 5 seconds.
what connect with pc i should choose ?
ReplyDeleteit all been okay, since i connect my phone to pc, with download mode, and loades doesnt let me to click download.....
ReplyDeleteit all been okay, since i connect my phone to pc, with download mode, and loader doesnt let me to click download.....
ReplyDeletei cant patch, please help!!!!!!!
ReplyDeleteYou must use Multiloader 5.56
Deletei sir I had tried to patch XEJE1 in my samsung gt s5620 monte but after comletion of download also my mobile didnt restar. What can be the reason for this and also provide me some suggestions to solve it.
ReplyDeletewhat about DDJL1 dude, can we do anythig with this type of DDJL1
ReplyDeleteHi,
ReplyDeleteSiris, iam new one monte lover!!! I am using s562mfjf1, csc ver s5620!SEKJF1. Icwant to change my monte look( mod??) please tell me the next step what to do. I'll be thank you. On my email plzzz- mtluanga25@gmail.com
hi im kerojam delarosa im asking if i want to use a usb and connect to the pc can i see an easy step to upgrade my phone into an excellent MOD ESP they can boost of my MONTE reply me on facebook
ReplyDeletecan u upload monte mod themes once more???? because most of the mods are missing
ReplyDeleteone ques:
ReplyDeleteby all this only apperance is changed or the platform is changed from java to android
Bro is version mein games aur apps android k kam krenge ya wahi purane java k
ReplyDeleteNEED download link to mfjf1 firmware..all mirror are broken please send a new one!!! urgently needed
ReplyDeleteHi.The download button of multiloader doesnt become active even after connecting my mobile in download mode.I cant press that button
ReplyDelete